Sepetiniz boş
Alışverişe BaşlaPipe entry dimensions are specified on our products. Mark the pipes according to these dimensions.
Always perform a pressure test after assembly. Make sure the gaskets are properly seated.
Our products do not expand/contract between -20°C and +80°C and do not cause leaks.
Use cutting and assembly tools suitable for plastic. Do not apply excessive force.
| Problem | Possible Cause | Solution |
|---|---|---|
| Leak at connection point | Pipe not fully seated, faulty gasket | Push the pipe up to the marked point, check the gasket |
| Valve stiffness | Foreign matter, excessive force | Clean, do not apply excessive force |
| Product cracking | Excessive pressure, impact | Check pressure values, protect from impact |
| Connection breakage | Incorrect assembly, excessive strain | Follow assembly instructions |
Our expert team is here to help you with technical questions about our products.
All our products are guaranteed for 10 years
Detailed assembly and user manuals
Technical support line for emergencies
You can reach us 7/24 for emergency technical problems with our products.